View 200 TG ARGB Snow Mid Tower Chassis
View 200 TG ARGB Snow Mid Tower Chassis is an ATX case that comes with three preinstalled hydraulic bearing 120mm ARGB Lite front fans, and its RGB lighting is visible through its uniquely designed tempered glass front panel. Its RGB lighting can be controlled by motherboard software from ASUS, GIGABYTE, MSI, and ASRock. Moreover, up to six 120mm fans can be fitted in the chassis and up to a 360mm radiator can be placed at the front of the View 200 TG ARGB Snow Mid Tower Chassis.
- The image is for reference only.
Tempered Glass Front Panel
View 200 TG ARGB Snow Mid Tower Chassis is designed for better viewing that its RGB lighting is visible through its uniquely designed tempered glass front panel.
- The image is for reference only.
Three Preinstalled Hydraulic Bearing 120mm ARGB Lite Front Fans
View 200 TG ARGB Snow Mid Tower Chassis comes with three pre-installed hydraulic bearing 120mm ARGB Lite fans at the front of the case. Its fascinating lighting effects be controlled by motherboard software from ASUS, GIGABYTE, MSI, and ASRock.
Built-in PSU Cover
View 200 TG ARGB Snow Mid Tower Chassis features a full length power supply cover providing plenty of space to tuck away cables, while keeping airflow clear for your hard drives and PSU.
Tempered Glass Panel
View 200 TG ARGB Snow Mid Tower Chassis comes with one 3mm tempered glass panel on the left side, thicker and more scratch resistant when compared to standard acrylic. On top of that, the enlarged window design enables you to display and admire all your components in their full RGB glory.
- The image is for reference only.
Opportunities For High-End Expansion
View 200 TG ARGB Snow Mid Tower Chassis has good expandability. It can support a CPU cooler with a maximum height of 166mm, VGA placement of up to 330mm in length (without radiator), a power supply with a length of up to 190 mm (with HDD Rack). Optimized for excellent cooling capability, the case comes with three hydraulic bearing 120mm ARGB Lite fans preinstalled at the front; you can also choose to put two 140mm fans at the front and on top, or up to six 120mm fans can be fitted in. For radiator compatibility, it can support up to 360mm at the front, giving more opportunities for high-end expansion!
- 120mm
- 140mm
- 120mm
- 140mm
- 240mm
- 280mm
- 360mm
Handy I/O Ports
Two USB 3.0 ports, one HD Audio and one reset button are placed on the top panel to grant direct access when needed.
All-in-One Compatibility List
All-in-One Compatibility List
120 Series | 240 Series | 360 Series | 140 Series | 280 Series | 420 Series | |
---|---|---|---|---|---|---|
Front | ● | ● | ● | ● | ● | - |
Top | ● | ● | - | - | - | - |
Rear | ● | - | - | - | - | - |
Fan Support List
Fan Compatibility List
120mm | 140mm | 200mm | |
---|---|---|---|
Front | 3 | 2 | - |
Top | 2 | 2 | - |
Rear | 1 | - | - |
', '', '
'], dig: ["1", "2", "3", "4"], icon: ["1", "2", "4", "3"] } var caseText = ""; for (var num = 0; num < caseCont.name.length; num++) { caseText += '
' + '
' + caseCont.name[num] + '
' + caseCont.descript[num] + '
' + caseCont.line[num]; if (num == 2) { caseText += '
'; } caseText += '
'; } var $casePart = document.getElementById("casePart"); $casePart.innerHTML = caseText + '
'; //------------------------------------------------------------------------------ var hddCont1 = { name: ["HDD", "HDD"], descript: ["3.5” HDD x 2
or
2.5” SSD x 2", "2.5” SSD x 2"], icon: ["8", "8"], } var hddText1 = ""; for (var num = 0; num < hddCont1.name.length; num++) { hddText1 += '
' + '
' + hddCont1.name[num] + '
' + hddCont1.descript[num] + '
'; } var $hddPart1 = document.getElementById("hddPart1"); // $hddPart1.innerHTML = hddText1 + '
'; //------------------------------------------------------------------------------ var hddCont2 = { name: ["HDD"], descript: ["2.5” SSD x 3"], icon: ["8"], } var hddText2 = ""; for (var num = 0; num < hddCont2.name.length; num++) { hddText2 += '
' + '
' + hddCont2.name[num] + '
' + hddCont2.descript[num] + '
'; } var $hddPart2 = document.getElementById("hddPart2"); // $hddPart2.innerHTML = hddText2 + '
'; //迴圈開始 $("#oppSlideWrap").each(function () { var $this = $(this); var thisSlide = $this.find(".absTxtBox"); var currentNum = 0; var btnArray = []; var oppSlideItem = {} $("#casePart .absInfo").addClass("imgDisappear"); //按鈕 var btnCont = ['Dimensions', 'Fan Capacity', 'Radiator Capacity']; //$.each(btnCont, function(a, val){ //var b = $(".oppSlideBtn").append('
'+ val+ '
'); //}); $.each(thisSlide, function (num) { var $button = $('
' + btnCont[num] + '
'); if (num === currentNum) { $button.addClass('active'); } $button.on('click', function () { move(num); }).appendTo('.oppSlideBtn'); btnArray.push($button); }); //滑動區塊 function move(newNum) { var animateLeft, slideLeft; if ($(".oppSlideCont").is(':animated') || currentNum === newNum) { return; } btnArray[currentNum].removeClass('active'); btnArray[newNum].addClass('active'); if (newNum > currentNum) { // 讓他可以動 slideLeft = '100%'; animateLeft = '-100%'; } else { slideLeft = '-100%'; animateLeft = '100%'; } thisSlide.eq(newNum).css({ display: 'block', left: slideLeft // 讓他可以動 }); //$(".oppSlideCont").each(function() { $(".oppSlideCont").animate({ left: animateLeft // 讓他可以動 }, function () { thisSlide.eq(currentNum).css({ display: 'none' }); thisSlide.eq(currentNum).find(".absInfo").removeClass("imgDisappear"); //-------------------------------------------------------------------- thisSlide.eq(newNum).css({ left: 0 }); setTimeout(function () { thisSlide.eq(newNum).find(".absInfo").addClass("imgDisappear"); }, 300); //-------------------------------------------------------------------- $(".oppSlideCont").css({ left: 0 }); currentNum = newNum; //這一動的 newNum數字 在按下一次會變成 currentNum的數字 }); console.log(newNum); console.log(currentNum); } }); $(document).ready(function () { var $win = $(window), $win_height = $(window).height(), windowPercentage = $(window).height() * 0.9; $win.on("scroll", scrollReveal); function scrollReveal() { var scrolled = $win.scrollTop(); $(".fullBgBox2 .bigPic3 .img img").each(function () { var $this = $(this), offsetTop = $this.offset().top; if ( scrolled + windowPercentage > offsetTop || $win_height > offsetTop ) { $(this).each(function (key, bar) { $(this).addClass('imgDisappear'); }); } else { $(this).each(function (key, bar) { $(this).removeClass('imgDisappear'); }); } }); } scrollReveal(); }); });